Overview
ESP32-S3 Plus, powered by ESP32-S3’s 240MHz Xtensa 32-bit LX7 dual-core processor, brings more SMD pins to the tiny versatile ESP32-S3. While maintaining all the powerful features including WiFi and BLE 5.0 wireless connectivities and 2.4GHz Rod antenna, the Plus variant features redesigned castellations and pad layout on the back, offering 9 additional GPIOs specifically for advanced Bluetooth projects requiring expanded I/Os via SMD board-to-board soldering. It’s ideal for advanced IoT projects, Smart Homes, and professional wireless devices requiring extra I/O connectivity.
Key features
Inspired by the unique SMD pins design of the RICK TNY, we’re now introducing the Plus boards (available in nRF52840 Plus, nRF52840 Sense Plus, and ESP32-S3 Plus) to include an updated design of more castellations and a new pad layout on the back.
ESP32-S3 Plus, powered by ESP32-S3’s 240MHz Xtensa 32-bit LX7 dual-core processor, brings more SMD pins to the tiny versatile ESP32-S3. While maintaining all the powerful features including WiFi and BLE 5.0 wireless connectivities, 2.4GHz Rod antenna, and ultra-low power consumption of 14μA in deep sleep mode with lithium battery charging management, the Plus variant features redesigned castellations and pad layout on the back, offering 9 additional GPIOs specifically for advanced Bluetooth projects requiring expanded I/Os via SMD board-to-board soldering. It’s ideal for advanced IoT projects, Smart Homes, and professional wireless devices requiring extra I/O connectivity. ESP32-S3 Plus additionally features an upgraded 16MB Flash memory for advanced applications.
- High-Performance MCU: Dual-core ESP32-S3 at 240MHz, Arduino / MicroPython / ESP-IDF compatible
- Advanced Wireless: 2.4GHz WiFi + BLE 5.0, 100m+ range with U.FL antenna support
- Efficient Power Management: Four power modes with 14μA deep sleep, integrated Li-ion charging
- Expanded 20 GPIOs: 9 extra 1.27mm pitch SMD castellation pins beyond standard nRF52840
- Universal Compatibility: Standard backside layout (with aligned battery pads, and debugger pads) for more to-be-released expansion boards
- Classic Form Factor: 21 x 17.8mm design with 2.54mm pin headers, single-sided mounting for wearables and space-constrained projects
- Accessory Add-ons Compatibility: Natively compatible with all the accessory add-ons of expansion, connectivity modules (LoRa, CAN_Bus, RS-485), sensors (2-Mic Array, Vision AI, mmWave Motion, Environmental sensing), and actuators (ePaper display, LED Matrix, relay and more).
Production-Ready Design with Fusion PCBA Support
As a new addition to the family, the ESP32S3 Plus remains the classic design (thumb-size, SMD, stamp holes). All these features make it a perfect fit for either space-limited applications, or a production-ready System on Module (SoM) for your PCBA designs. With our Fusion services, you can access competitive one-stop PCBA manufacturing, component sourcing, and testing, plus free DFA/DFM review to reduce manufacturing risks and accelerate the journey from prototype to production.
Note
SoM User Manual open-sources all hardware and software materials, providing professional product design guidelines to help you accelerate ideas off the ground, streamline product design, providing a seamless experience from module selection to mass production. You can check here to see more info.
Specification
Item | ESP32-S3 | ESP32-S3 Plus |
|---|---|---|
Processor | ESP32-S3R8 Xtensa LX7 dual-core, 32-bit processor that operates at up to 240 MHz | |
Wireless | Complete 2.4GHz Wi-Fi subsystem Bluetooth Low Energy 5.0 / Bluetooth Mesh | |
Memory | On-chip 8MB PSRAM & 8MB Flash | On-chip 8MB PSRAM & 16MB Flash |
Interface | 1x UART 1x IIC 1x SPI 11x GPIOs (PWM) 9x ADC 1x User LED 1x Charge LED 1x Reset button 1x Boot button | 2 x UART 1x IIC 1x IIS 2 x SPI 18 x GPIOs (PWM) 9x ADC 1x User LED 1x Charge LED 1x B2B Connector 1x Reset button 1x Boot button |
Dimensions | 21 x 17.8mm | |
Power(Typ.) | Input voltage (Type-C): 5V Input voltage (BAT): 3.7V | |
Circuit operating Voltage: – Type-C: 5V@19mA – BAT: 3.8V@22mA | Circuit operating Voltage: – Type-C: 5V@28mA – BAT: 3.8V@35mA | |
Charging current: 50mA(Fast) / 3.8mA(Trickle) | Charging current: 100mA(Fast) / 0.9mA(Trickle) | |
Low Power Consumption Model(Typ.) | Modem-sleep Mode: 3.8V/25 mA Light-sleep Mode: 3.8V/2 mA Deep Sleep Mode: 3.8V/14 μA | Modem-sleep Mode: 3.8V/31.6 mA Light-sleep Mode: 3.8V/2.45 mA Deep Sleep Mode: 3.8V/33.51 μA |
Wi-Fi Enabled Power Consumption(Typ.) | Active Mode: 100 mA | Active Mode: 81 mA |
BLE Enabled Power Consumption(Typ.) | Active Mode: 85 mA | Active Mode: 101 mA |
Working Temperature | -40°C ~ 65°C | |
Application
- Internet of Things
- Wearable devices
- Smart Homes
- Robotics
- Health monitoring
- Education
- ESP-Now Communication
- Low-Power(LP) networking
Part list
ESP32-S3 Plus | x1 |
Antenna | x1 |
7 Pin Header | x2 |























Reviews
There are no reviews yet.