Skip to content

ESP32-S3

$7.49

ESP32S3 leverages 240MHz Xtensa 32-bit LX7 dual-core processor, supporting both WiFi and BLE 5.0 wireless connectivities and a 2.4GHz Rod antenna. Ideal for the Internet of Things, Smart Homes, Wireless wearable devices, Robotics, etc.

SKU: 113991114 Category:

Overview

These boards are diminutive development boards, sharing a similar hardware structure, where the size is literally thumb-sized. The code name here represents its half feature “Tiny”, and the other half will be “Puissant”.

ESP32S3 leverages 240MHz Xtensa 32-bit LX7 dual-core processor, supporting both WiFi and BLE 5.0 wireless connectivities, a 2.4GHz Rod antenna, allows for deep sleep mode with power consumption as low as 14μA while supporting lithium battery charging management. Ideal for the Internet of Things, Smart Homes, Wireless wearable devices, Robotics, etc.

ESP32S3 is a high-performance board powered by Expressif ESP32-S3R8 chip. With support for 2.4GHz WiFi and low-power Bluetooth® BLE 5.0 dual-mode wireless communication, this board is perfect for high-performance, low-power IoT applications.

When connected with the U.FL antenna, the remote communication distance and reach up to 100m.

Equipped with a powerful Xtensa® 32-bit LX7 dual-core processor running at up to 240MHz, 8MB PSRAM, and 8MB Flash, ESP32S3 is designed to handle multi demanding tasks with ease.

Additionally, ESP32S3 supports lithium battery charging management and allows for deep sleep mode with power consumption as low as 14μA. With 4 adjustable power modes, ESP32S3 can balance communication distance, data rate, and power consumption to meet the needs of various application scenarios.

At just 21 x 17.5mm, ESP32S3 is designed with the classic thumb-sized form factor, making it perfect for wearable devices. Its breadboard-friendly and surface-mount design makes it ideal for production, with all SMD components on a single-sided board for ease of mass production.

Please be noted that the pins are not included in this product. If you require the pins, please visit the following page to make a purchase.

Not only programming but also electronics knowledge is not required, you will be taken step by step, from understanding the basic concepts to exercising the simple projects individually, finally being able to build complex, interesting, wearable projects on your own, owing a practical electronic product prototype from the course.

You can have access to the ecosystem by connecting it to the compatible expansion board. We have developed more than 400 modules, covering a wide range of applications that can fulfill various needs. Get started and explore the infinite possibilities of the series!

Currently, these boards don’t come with a pin header.

Key features

  • Powerful MCU Board: Incorporate the ESP32-S3 32-bit, dual-core, Xtensa processor running at up to 240MHz, mounted multiple development ports, Arduino / MicroPython supported
  • Outstanding RF performance: Supports 2.4GHz WiFi and BLE 5.0 dual wireless communication, support 100m+ remote communication when connected with U.FL antenna
  • Elaborate Power Design: Lithium battery charge management capability, offer 4 power consumption model which allows for deep sleep mode with power consumption as low as 14μA
  • Thumb-sized Compact Design: 21 x 17.8mm, adopting the classic form factor, suitable for space limited projects like wearable devices
  • Perfect for Production: Breadboard-friendly & SMD design, no components on the back

Production-Ready Design with Fusion PCBA Support

All dev boards feature a production-optimized SMD (Surface Mount Device) design with standardized stamp holes, making it perfect for commercial PCBA (Printed Circuit Board Assembly) integration.

With our Fusion services, you can access competitive one-stop PCBA manufacturing, component sourcing, and testing, plus free DFA/DFM review to reduce manufacturing risks and accelerate the journey from prototype to production.

Note

SoM User Manual open-sources all hardware and software materials, providing professional product design guidelines to help you accelerate ideas off the ground, streamline product design, providing a seamless experience from module selection to mass production. You can check here to see more info.

Starter Kit with free Course for all Electronics Neophytes and Enthusiasts

Not only programming but also electronics knowledge is not required, you will be taken step by step, from understanding the basic concepts to exercising the simple projects individually, finally being able to build complex, interesting, wearable projects on your own, owing a practical electronic product prototype from the course.

You can have access to the ecosystem by connecting it to the compatible expansion board. We have developed more than 400 modules, covering a wide range of applications that can fulfill various needs. Get started and explore the infinite possibilities of the series!

If you are interested in programming embedded machine learning, we have Codecraft visual programming that can help you quickly start your own TinyML project. And we have set up a #tinyml channel on our Discord server, please click to join for 24/7 making, sharing, discussing, and helping each other out.

We already have 15 products based on different solutions in the family, to help you better understand the differences and choose the most suitable part for your projects, please refer to the Series Page.

Specification

Parameter

ESP32-S3

ESP32-C3

Processor

ESP32-S3R8 SoC

ESP32-C3 SoC

Xtensa LX7 dual-core, 32-bit processor running up to 240 MHz

RISC-V single-core 32-bit chip processor with a four-stage pipeline that operates at up to 160 MHz

Wireless

Complete 2.4GHz WiFi subsystem

Bluetooth Low Energy 5.0 / Bluetooth Mesh

On-chip Memory

8MB PSRAM & 8MB Flash

400KB SRAM & 4MB Flash

Interface

1x UART

1x IIC

1x SPI

11x GPIO(PWM)

9x ADC

1x User LED

1x Charge LED

1x UART

1x IIC

1x SPI

11x GPIO(PWM)

4x ADC

1x Charge LED

1x Reset button

1x Boot button

Dimensions

21 x 17.8mm

Power(Typ.)

Input voltage (Type-C): 5V

Input voltage (BAT): 3.7V

Input voltage (Type-C): 5V

Input voltage (BAT): 3.7V

Circuit operating Voltage:

– Type-C: 5V@19mA

– BAT: 3.8V@22mA

Circuit operating Voltage:

– USB:5V@9mA

– BAT:3.8V@9mA

Charging current:

50mA(Fast) / 3.8mA(Trickle)

Charging current:

380mA(Fast) / 40mA(Trickle)

Low Power Consumption Mode(Typ. )

(Supply Power: 3.8V)

Modem-sleep Model: 27 mA

Light-sleep Model: 2mA

Deep Sleep Model: 14 μA

Modem-sleep Model: 24 mA

Light-sleep Model: 3 mA

Deep Sleep Model: 44 μA

WiFi Enabled Power Consumption(Typ. )

Active Mode: 220 mA

Active Mode: 103 mA

BLE Enabled Power Consumption(Typ. )

Activex Mode: 217 mA

/

Working Temperature

-40°C ~ 65°C

-40°C ~ 85°C

Application

  • Internet of Things
  • Wearable devices
  • Smart Homes
  • Robotics
  • Health monitoring
  • Education
  • Low-Power(LP) networking
  • Rapid prototyping

Hardware overview

  • Onboard

*ESP32 S3 version was not included the B2B connector.

  • PinOut

Part list

ESP32S3

x1

Antenna

x1

7 Pin Header

x2

Note: Starting from September 2024, the overseas warehouses are shipping a mix of old and new stock of ESP32S3. Note that the new stock from the CN warehouse comes with Pin Header, while the old doesn’t.

Reviews

There are no reviews yet.

Be the first to review “ESP32-S3”